INDICATIVE DOSAGE

Tanning Phase:

• 0.05ml (5 mark on syringe) daily until desired tan is obtained
• You need to expose yourself to sunlight every day during this phase, even if briefly

Maintenance Phase

• Up to 0.1ml (10 mark on syringe) twice per week
• This is the phase when you have reached your desired level of tan

ADMINISTRATION PROTOCOL

• With provided alcohol wipe, wipe down the rubber part of the vial.
• Remove protective cover and stopper from the needle.
• Draw the same amount of air into the syringe as required dosage amount.
• Place needle into rubber part of bottle and push the plunger down to inject all the air SEE IMAGE 1.
• Turn the bottle and syringe upside-down. Be sure the needle is fully immersed before drawing back.
• Pull back on the plunger to required dosage (measure from the top of the plunger) SEE IMAGE 2.
• Check syringe for air bubbles, tap the syringe so the air bubbles rise to the top and push up on the plunger to remove the air bubbles.
• Recheck the dose and add more to the syringe if necessary.
• Choose a site for injection and wipe clean with alcohol wipe.
• With your other hand, gently pinch a small fold of skin on either side of the cleaned injection site.
• Insert the needle fully into the pinched skin at a 90-degree angle (straight up and down) and slowly push on the plunger with your thumb until the bottom of the syringe is reached SEE IMAGE 3.
• Be sure to vary the exact injection side each time.